Molybdenum parts information:
Purity: 99.95%(min)
Density: 10.2g/cm3
Size: Standard or non-standard parts
Standard: ASTM
Molybdenum Threaded Rods
Molybdenum threaded rods are produced for high temperature vacuum environments. These refractory threaded rods can be cut and finished off to desired lengths. In many cases, cut pieces can be coupled with washers and nuts to emulate a screw.
Molybdenum Screws
Molybdenum screws are produced for high temperature vacuum environments. We produce three head types (fillister, pan & flat) in both ANSI and metric sizes. We stock these refractory screws in standard lengths, but can also produce custom lengths and custom features. Please take note of the sketch provided for screw specs.
Molybdenum Nuts
Molybdenum refractory nuts are available in both inch and metric sizing. We stock many sizes/shapes, and offer a same day shipping policy. Our most popular shape is the hex.
Molybdenum Washers
Molybdenum refractory washers are available in both inch and metric sizes. Washers help to distribute the load of a threaded fastener. All standard sizes are available. We can also produce custom sizes.
| Grade |
The impurity content is not more than % |
| Fe |
Ni |
Al |
Ca |
Si |
Mg |
C |
N |
O |
| Mo-1 |
0.010 |
0.005 |
0.002 |
0.002 |
0.01 |
0.002 |
0.01 |
0.003 |
0.008 |
Our products
High quality with reasonable price
About FAQ
If you have any question,just feel free to contact us.We'll also provide you good after-sale service.
Company information
We have been exporting for more than 10 years,our products and teams are worthy of your trust.We'd like to establish friendly cooperation relations with you from all over the world.
Dear friend,we are all from the earth,expect to meet you,my friend.Let's go forward together.
Audited Supplier 
){kind=link}
){kind=link}